The Intel 845GVSR motherboard supports two banks of DDR RAM for a total of up to 2 GB of memory. We are installing two piece of 256 MB DDR total 512MB. The DIMM(Dual Inline Memory Modules) are keyed with two notches so they can't be installed backward.
Spreading the DIMM Socket
Before installing any modules, make sure the white locking levers on the sides of the sockets are spread. As you seat the module by applying even pressure with two thumbs, the white levers will raise into position. This requires a good deal of pressure, so do this with the motherboard placed on its static bag on a hard, flat surface.
The second DIMM is installed in the same bank as the first, filling Bank 0 before Bank 1. DIMM modules are only 32bit wide, so it takes two modules to make up the 64-bit dual-channel memory bus width.
Seating the DIMM
No comments:
Post a Comment